Search found 35 matches

by Antipope1
Wed Jan 06, 2021 8:04 am
Forum: Training Support
Topic: could not broadcast input array
Replies: 1
Views: 1414

could not broadcast input array

Good morning. I started a new project last night, everything extracted as it should and training started normally, however 250(ish) iterations in I kept getting this error. Any ideas why? 1 01/06/2021 01:33:49 MainProcess _run_1 aligned_face extract_face DEBUG _extract_face called without a loaded i...
by Antipope1
Wed Dec 09, 2020 10:44 pm
Forum: Extract Support
Topic: Gpu not detected.
Replies: 3
Views: 3316

Gpu not detected.

When I started faceswap today, it said no gpu detected, switching to cpu mode. It was training OK yesterday, after I stopped training I updated faceswap and shut it down, then shut my pc down for the evening. Today I updated my nvidea game ready driver via Geforce experience, restarted my pc and tri...
by Antipope1
Wed Sep 30, 2020 10:54 am
Forum: Extract Discussion
Topic: Which mask to extract with
Replies: 1
Views: 2078

Which mask to extract with

I am about to start a new project. My video A has a person eating a meal, so there will be constant obstructions on front of the face.. Food, drinks etc. I will be using the manual tool to edit the mask for these obstructions. My question is, which mask would work best for the extraction process, so...
by Antipope1
Mon Sep 28, 2020 12:23 am
Forum: Convert Support
Topic: Error converting (bad object header version number)
Replies: 1
Views: 3053

Error converting (bad object header version number)

I tried to convert this evening and kept getting this error. 1 09/28/2020 01:03:19 MainProcess MainThread _config load_module DEBUG Added defaults: model.dfl_sae 2 09/28/2020 01:03:19 MainProcess MainThread _config load_module DEBUG Adding defaults: (filename: dlight_defaults.py, module_path: plugin...
by Antipope1
Tue Sep 08, 2020 10:43 pm
Forum: Training Support
Topic: Could not train after updating
Replies: 7
Views: 3282

Re: Could not train after updating

Thanks, I was starting to worry! So I'm guessing I can't use my original model (now archived), only my restored model? When I now start the training the preview faces are completely blurry as if I have only just started training from scratch, which is what gave me the impression I've lost all my tra...
by Antipope1
Tue Sep 08, 2020 10:26 pm
Forum: Training Support
Topic: Could not train after updating
Replies: 7
Views: 3282

Re: Could not train after updating

I managed to get this training again by restoring the model and using the model generated from that, however when starting that it has no logs and looks like I haven't done any training at all.
Hane I lost the 300k iterations I done one this model??

by Antipope1
Tue Sep 08, 2020 11:09 am
Forum: Extract Discussion
Topic: Deleting faces in manual alignment
Replies: 3
Views: 3369

Re: Deleting faces in manual alignment

Thanks. So just to make sure I get this right as I'm good at getting things in the wrong order.. Extract and then use the manual tool, adjust alignments where necessary, just ignore any frames that I don't need. Then after re-extracting from the alignments file using the extract tool (in the tools m...
by Antipope1
Tue Sep 08, 2020 1:40 am
Forum: Training Support
Topic: Could not train after updating
Replies: 7
Views: 3282

Could not train after updating

I ran into a problem this evening! I have been fit training a model to nearly 300k iterations on realface. This evening I manually aligned the faces from the video I actually wish to convert, loaded them onto the trainer and trained over 1000 iterations. I saved the project and noticed faceswap need...
by Antipope1
Tue Sep 08, 2020 1:27 am
Forum: Extract Discussion
Topic: Deleting faces in manual alignment
Replies: 3
Views: 3369

Deleting faces in manual alignment

I was using the manual alignment tool this evening, and spent a few hours manually adjusting alignments for over 5k images, deleting any that were "spiderwebs" that were in parts if the frames that were not faces. I then skipped back to the first frame to go back through the alignments and...
by Antipope1
Mon Sep 07, 2020 8:10 pm
Forum: Extract Discussion
Topic: Face obstructions
Replies: 2
Views: 3233

Re: Face obstructions

Thanks! I have used the manual tool, it can take a while depending on the length of the video, especially if being picky like I am ( I know they don't all have to be perfect, but I try to get close as), however the results are definitely worth it! It would be great if there was a tool to manually ma...
by Antipope1
Fri Sep 04, 2020 3:37 pm
Forum: Extract Discussion
Topic: i love the new manual tool, but...
Replies: 3
Views: 5225

Re: i love the new manual tool, but...

... it would be nice if there where an zoom option at the Bounding Box Editor ( face/bounding box zoom ) like in the View Alingments option or Landmark Point Editor to get an better view how good the Landmarks are aligned and if the Bounding Bos has to be moved to get it better aligned. Just though...
by Antipope1
Thu Sep 03, 2020 10:26 pm
Forum: Extract Discussion
Topic: Face obstructions
Replies: 2
Views: 3233

Face obstructions

When creating a faceswap, some parts of my video A have obstructions, e.g. Hands, drinks etc. When using the obstructed mask for training, some of the obstructions are either blurred or completely removed once I convert. Is it possible to delete individual points from the alignments on selected fram...
by Antipope1
Fri Aug 28, 2020 10:13 pm
Forum: Hardware
Topic: System Ram
Replies: 2
Views: 2440

System Ram

Hi all. I was just wondering, on what part of the faceswap process system ram is used, and what would be improved by increasing ram? I currently have 8gb system ram and have just ordered 32gb (2x16gb), I know what effect that would have on gaming and the pc in general, I'm curious as to what I can e...
by Antipope1
Sun Aug 23, 2020 11:18 pm
Forum: Convert Support
Topic: Invalid value avg_colour
Replies: 1
Views: 1956

Invalid value avg_colour

I have this message come up when converting, just curious as to what it is? I:\FS\faceswap\pluginst\color\avg_color.py:16: RuntimeWarning: invalid value encountered in true_divide adjustment = avg_diff / np.sum(raw_mask, axis=(0, 1)) I:\FS\faceswap\lib\convert.py:193: RuntimeWarning: invalid value e...
by Antipope1
Fri Aug 21, 2020 12:04 am
Forum: Extract Discussion
Topic: Can't open manual tool
Replies: 9
Views: 4380

Re: Can't open manual tool

Just tried using the alignments file and the original video and it worked! I think I was getting confused with the process. I learned how to use Faceswap with the guides on this forum quite a while ago. From that, I used to extract, sort, delete whatever frames I didn't want for training, then use t...
by Antipope1
Thu Aug 20, 2020 11:36 pm
Forum: Extract Discussion
Topic: Can't open manual tool
Replies: 9
Views: 4380

Re: Can't open manual tool

I've been extracting from the video using the extract process, sorting/deleting unwanted/removing frames to clean up alignment file and then going straight over to the manual tool using the extracted frames folder and the cleaned alignments.

by Antipope1
Thu Aug 20, 2020 11:00 pm
Forum: Extract Discussion
Topic: Can't open manual tool
Replies: 9
Views: 4380

Re: Can't open manual tool

Had another try this evening after noticing an update, still no luck I'm afraid! 1 08/20/2020 23:37:21 MainProcess _load_from_folder_0 multithreading run DEBUG Error in thread (_load_from_folder_0): '00180_0.png' 2 08/20/2020 23:37:21 MainProcess _load_from_folder_0 detected_faces _load_from_folder ...
by Antipope1
Thu Aug 20, 2020 6:27 am
Forum: Extract Discussion
Topic: Can't open manual tool
Replies: 9
Views: 4380

Re: Can't open manual tool

I tried that, still no luck. 1 08/20/2020 07:13:04 MainProcess MainThread multithreading __init__ DEBUG Initialized MultiThread: '_load_from_folder' 2 08/20/2020 07:13:04 MainProcess MainThread multithreading start DEBUG Starting thread(s): '_load_from_folder' 3 08/20/2020 07:13:04 MainProcess MainT...
by Antipope1
Wed Aug 19, 2020 11:50 pm
Forum: Extract Discussion
Topic: Can't open manual tool
Replies: 9
Views: 4380

Can't open manual tool

This evening I couldn't open the manual tool! I have attached the report. 1 08/20/2020 00:29:35 MainProcess MainThread multithreading start DEBUG Started all threads '_load_from_folder': 1 2 08/20/2020 00:29:35 MainProcess MainThread multithreading __init__ DEBUG Initializing MultiThread: (target: '...
by Antipope1
Tue Aug 18, 2020 6:39 pm
Forum: Installation Support
Topic: Tensorflow 2.3.0
Replies: 7
Views: 3910

Re: Tensorflow 2.3.0

This Is what I get when updating.
This Is what I get when updating.
Untitled.png (85.26 KiB) Viewed 3885 times