Faceswap can be installed on macOS, both Intel and Apple Silicon.
Some notes if running a GPU on Intel:
Nvidia - you will likely run into problems. The last Nvidia drivers available on macOS are only on High Sierra. This means that, whilst the install option for Nvidia is there, Cuda will need to be installed, and Tensorflow 2.10 will need to be compiled to use the installed version of cuda (stock Tensorflow 2.10 will fail to install on High Sierra).
AMD - there is no direct support/testing. However, you should install the cpu version here. and see if your GPU is supported by macOS Metal. If so, you may have luck installing the tensorflow-metal plugin from apple.
Install Guide
Open up Terminal and paste this command to download and launch the faceswap install script (do not execute this command as sudo or root):
The Faceswap Logo will display followed by some information. Make sure you read it thoroughly (specifically the part about user permissions on destination folders) then press Enter to continue.
02_intro.png (47.6 KiB) Viewed 64843 times
Apps - If any additional required apps are detected as missing, you are given the option to install them here.
03_apps.png (15.2 KiB) Viewed 64843 times
XQuartz is required to display the GUI on macOS. You should select yes if this option is displayed.
Conda - Faceswap uses Conda as it handles the installation of all prerequisites (git, Tensorflow etc) and contains them within their own environment, away from the rest of your system.
If an existing Conda install is found you will be asked if you want to use it. You should select Yes.
These next options will only be displayed if an existing Conda install was not found, or if you select No to using the existing Conda install.
04_conda.png (45.36 KiB) Viewed 64843 times
Please specify a location for Conda: - The default install location for Conda will be fine in 99% of cases. If you do wish to install it elsewhere, then make sure that:
Your user has permissions to write to the location you select.
There are no spaces in the location that you provide (this is a Conda limitation and is outside of our control).
If you are happy with the default location then just press Enter
Add Conda executable to path:. This is up to you, but it will make life easier if you say Yes. It basically means that you will have access to the conda command from the command line, and won't need to search for the executable inside the miniconda3 folder. Hit Enter to select the default value or press n if you don't want Conda added to your path.
Please specify a name for the Faceswap Conda Environment: Faceswap is run inside a "virtual environment". This is a Python environment that is kept separate from the rest of your system to avoid conflicts. The environment needs a name. The default should be fine, but if you have multiple installs then you will want to set a specific environment name here. NB: If an environment already exists with the name you select then it will be deleted (you will be notified if this will occur prior to commencing install). Press Enter to use the default faceswap or enter your preferred name here.
Faceswap - Where you want Faceswap installed, and version selection
05 faceswap.png (30.77 KiB) Viewed 64843 times
Please specify a location for Faceswap: The location that you want Faceswap installed to. The default will be fine in 99% of cases, but as with the Conda install, if you do select a different location, then make sure your user has permission to write to it. NB: If a folder pre-exists at the location given, then it will be deleted (you will be notified if this will occur prior to commencing install). Press Enter to use the default location or enter your preferred location here.
Faceswap version: For M1/M2 macs you must select 1 for Apple Silicon. For Intel, Faceswap can be run on Nvidia or AMD GPUs, but with caveats. See the notes at the beginning of this page. The software it installs varies depending on what you select here, so make sure you select the correct option for your system.
Enter 1 for Apple Silicon, 2 for Nvidia, 3 for CPU
Post Install Actions - A wrapper can be created to activate the environment and launch the GUI. This will be placed on the desktop, but can be moved anywhere more convenient. This makes opening Faceswap a lot easier, so unless you have a good reason not to, you should select Y here.
06_launcher.png (22.16 KiB) Viewed 64843 times
Review - Finally you will be able to review your options. If you are happy press Y to proceed with the install, or press Enter to abort.
07_review.png (26.65 KiB) Viewed 64843 times
Install - The installer will proceed to download the resources it needs from the internet and install as per your options.
If XQuartz was selected for installation, then it will be installed first and you will be prompted for the Adminstrator password:
08_xquartz.png (17.95 KiB) Viewed 64840 times
The dependencies and Faceswap will then be installed. This may take some time.
09_finish.png (19.63 KiB) Viewed 64840 times
Once complete, if selected, a launcher will be placed on the Desktop. You can place this launcher in applications/the dock or anywhere else that is convenient.
10_launcher.png (19.07 KiB) Viewed 64840 times
Note If XQuartz was installed you should log out and log in again for the GUI to work.
Last edited by torzdf on Fri Jul 14, 2023 1:02 pm, edited 5 times in total.
#!/bin/bash
TMP_DIR="/tmp/faceswap_install"
URL_CONDA="https://repo.anaconda.com/miniconda/Miniconda3-latest-MacOSX-"
DL_CONDA="${URL_CONDA}x86_64.sh"
DL_FACESWAP="https://github.com/deepfakes/faceswap.git"
DL_XQUARTZ="https://github.com/XQuartz/XQuartz/releases/latest/download/XQuartz-2.8.5.pkg"
CONDA_PATHS=("/opt" "$HOME")
CONDA_NAMES=("anaconda" "miniconda" "miniforge")
CONDA_VERSIONS=("3" "2")
CONDA_BINS=("/bin/conda" "/condabin/conda")
DIR_CONDA="$HOME/miniconda3"
CONDA_EXECUTABLE="${DIR_CONDA}/bin/conda"
CONDA_TO_PATH=false
ENV_NAME="faceswap"
PYENV_VERSION="3.10"
DIR_FACESWAP="$HOME/faceswap"
VERSION="nvidia"
DESKTOP=false
XQUARTZ=false
header() {
# Format header text
length=${#1}
padding=$(( (72 - length) / 2))
sep=$(printf '=%.0s' $(seq 1 $padding))
echo ""
echo $'\e[32m'$sep $1 $sep
}
info () {
# output info message
while read -r line ; do
echo $'\e[32mINFO\e[39m '$line
done <<< "$(echo "$1" | fmt -s -w 70)"
}
warn () {
# output warning message
while read -r line ; do
echo $'\e[33mWARNING\e[39m '$line
done <<< "$(echo "$1" | fmt -s -w 70)"
}
error () {
# output error message.
while read -r line ; do
echo $'\e[31mERROR\e[39m '$line
done <<< "$(echo "$1" | fmt -s -w 70)"
}
yellow () {
# Change text color to yellow
echo $'\e[33m'
}
check_file_exists () {
# Check whether a file exists and return true or false
test -f "$1"
}
check_folder_exists () {
# Check whether a folder exists and return true or false
test -d "$1"
}
download_file () {
# Download a file to the temp folder
fname=$(basename -- "$1")
curl -L "$1" --output "$TMP_DIR/$fname" --progress-bar
}
check_for_sudo() {
# Ensure user isn't running as sudo/root. We don't want to screw up any system install
if [ "$EUID" == 0 ] ; then
error "This install script should not be run with root privileges. Please run as a normal user."
exit 1
fi
}
check_for_curl() {
# Ensure that curl is available on the system
if ! command -V curl &> /dev/null ; then
error "'curl' is required for running the Faceswap installer, but could not be found. \
Please install 'curl' before proceeding."
exit 1
fi
}
check_for_xcode() {
# Ensure that xcode command line tools are available on the system
if xcode-select -p 2>&1 | grep -q "xcode-select: error" ; then
error "Xcode is required to install faceswap. Please install Xcode Command Line Tools \
before proceeding. If the Xcode installer does not automatically open, then \
you can run the command:"
error "xcode-select --install"
echo ""
xcode-select --install
exit 1
fi
}
create_tmp_dir() {
TMP_DIR="$(mktemp -d)"
if [ -z "$TMP_DIR" -o ! -d "$TMP_DIR" ]; then
# This shouldn't happen, but just in case to prevent the tmp cleanup function to mess things up.
error "Failed creating the temporary install directory."
exit 2
fi
trap cleanup_tmp_dir EXIT
}
cleanup_tmp_dir() {
rm -rf "$TMP_DIR"
}
ask () {
# Ask for input. First parameter: Display text, 2nd parameter variable name
default="${!2}"
read -rp $'\e[35m'"$1 [default: '$default']: "$'\e[39m' inp
inp="${inp:-${default}}"
if [ "$inp" == "\n" ] ; then inp=${!2} ; fi
printf -v $2 "$inp"
}
ask_yesno () {
# Ask yes or no. First Param: Question, 2nd param: Default
# Returns True for yes, False for No
case $2 in
[Yy]* ) opts="[YES/no]" ;;
[Nn]* ) opts="[yes/NO]" ;;
esac
while true; do
read -rp $'\e[35m'"$1 $opts: "$'\e[39m' yn
yn="${yn:-${2}}"
case $yn in
[Yy]* ) retval=true ; break ;;
[Nn]* ) retval=false ; break ;;
* ) echo "Please answer yes or no." ;;
esac
done
$retval
}
ask_version() {
# Ask which version of faceswap to install
while true; do
default=1
read -rp $'\e[35mSelect:\t1: Apple Silicon\n\t2: NVIDIA\n\t3: CPU\n'"[default: $default]: "$'\e[39m' vers
vers="${vers:-${default}}"
case $vers in
1) VERSION="apple_silicon" ; break ;;
2) VERSION="nvidia" ; break ;;
3) VERSION="cpu" ; break ;;
* ) echo "Invalid selection." ;;
esac
done
}
banner () {
echo $' \e[32m 001'
echo $' \e[32m 11 10 010'
echo $' \e[39m @@@@\e[32m 10'
echo $' \e[39m @@@@@@@@\e[32m 00 1'
echo $' \e[39m @@@@@@@@@@\e[32m 1 1 0'
echo $' \e[39m @@@@@@@@\e[32m 0000 01111'
echo $' \e[39m @@@@@@@@@@\e[32m 01 110 01 1'
echo $' \e[39m@@@@@@@@@@@@\e[32m 111 010 0'
echo $' \e[39m@@@@@@@@@@@@@@@@\e[32m 10 0'
echo $' \e[39m@@@@@@@@@@@@@\e[32m 0010 1'
echo $' \e[39m@@@@@@@@@ @@@\e[32m 100 1'
echo $' \e[39m@@@@@@@ .@@@@\e[32m 10 1'
echo $' \e[39m #@@@@@@@@@@@\e[32m 001 0'
echo $' \e[39m @@@@@@@@@@@ ,'
echo ' @@@@@@@@ @@@@@'
echo ' @@@@@@@@ @@@@@@@@ _'
echo ' @@@@@@@@@,@@@@@@@@ / _|'
echo ' %@@@@@@@@@@@@@@@@@ | |_ ___ '
echo ' @@@@@@@@@@@@@@ | _|/ __|'
echo ' @@@@@@@@@@@@ | | \__ \'
echo ' @@@@@@@@@@( |_| |___/'
echo ' @@@@@@'
echo ' @@@@'
sleep 2
}
find_conda_install() {
if check_conda_path;
then true
elif check_conda_locations ; then true
else false
fi
}
set_conda_dir_from_bin() {
# Set the DIR_CONDA variable from the bin file
pth="$(dirname "$1")/.."
DIR_CONDA=$(python -c "import os, sys; print(os.path.realpath('$pth'))")
info "Found existing conda install at: $DIR_CONDA"
}
check_conda_path() {
# Check if conda is in PATH
conda_bin="$(which conda 2>/dev/null)"
if [[ "$?" == "0" ]]; then
set_conda_dir_from_bin "$conda_bin"
CONDA_EXECUTABLE="$conda_bin"
true
else
false
fi
}
check_conda_locations() {
# Check common conda install locations
retval=false
for path in "${CONDA_PATHS[@]}"; do
for name in "${CONDA_NAMES[@]}" ; do
foldername="$path/$name"
for vers in "${CONDA_VERSIONS[@]}" ; do
for bin in "${CONDA_BINS[@]}" ; do
condabin="$foldername$vers$bin"
if check_file_exists "$condabin" ; then
set_conda_dir_from_bin "$condabin"
CONDA_EXECUTABLE="$condabin";
retval=true
break 4
fi
done
done
done
done
$retval
}
user_input() {
# Get user options for install
header "Welcome to the macOS Faceswap Installer"
info "To get setup we need to gather some information about where you would like Faceswap\
and Conda to be installed."
info "To accept the default values just hit the 'ENTER' key for each option. You will have\
an opportunity to review your responses prior to commencing the install."
echo ""
info "IMPORTANT: Make sure that the user '$USER' has full permissions for all of the\
destinations that you select."
read -rp $'\e[35m'"Press 'ENTER' to continue with the setup..."$'\e[39m'
apps_opts
conda_opts
faceswap_opts
post_install_opts
}
apps_opts () {
# Options pertaining to additional apps that are required
if ! command -V xquartz &> /dev/null ; then
header "APPS"
info "XQuartz is required to use the Faceswap GUI but was not detected. "
if ask_yesno "Install XQuartz for GUI support?" "Yes" ; then
XQUARTZ=true
fi
fi
}
conda_opts () {
# Options pertaining to the installation of conda
header "CONDA"
info "Faceswap uses Conda as it handles the installation of all prerequisites."
if find_conda_install && ask_yesno "Use the pre installed conda?" "Yes"; then
info "Using Conda install at $DIR_CONDA"
else
echo ""
info "If you have an existing Conda install then enter the location here,\
otherwise Miniconda3 will be installed in the given location."
err_msg="The location for Conda must not contain spaces (this is a specific\
limitation of Conda)."
tmp_dir_conda="$DIR_CONDA"
while true ; do
ask "Please specify a location for Conda." "DIR_CONDA"
case ${DIR_CONDA} in
*\ * ) error "$err_msg" ; DIR_CONDA=$tmp_dir_conda ;;
* ) break ;;
esac
CONDA_EXECUTABLE="${DIR_CONDA}/bin/conda"
done
fi
if ! check_file_exists "$CONDA_EXECUTABLE" ; then
echo ""
info "The Conda executable can be added to your PATH. This makes it easier to run Conda\
commands directly. If you already have a pre-existing Conda install then you should\
probably not enable this, otherwise this should be fine."
if ask_yesno "Add Conda executable to path?" "Yes" ; then CONDA_TO_PATH=true ; fi
fi
echo ""
info "Faceswap will be installed inside a Conda Environment. If an environment already\
exists with the name specified then it will be deleted."
ask "Please specify a name for the Faceswap Conda Environmnet" "ENV_NAME"
}
faceswap_opts () {
# Options pertaining to the installation of faceswap
header "FACESWAP"
info "Faceswap will be installed in the given location. If a folder exists at the\
location you specify, then it will be deleted."
ask "Please specify a location for Faceswap" "DIR_FACESWAP"
echo ""
info "Faceswap can be run on Apple Silicon (M1, M2 etc.), compatible NVIDIA gpus, or on CPU. You should make sure that any \
drivers are up to date. Please select the version of Faceswap you wish to install."
ask_version
if [ $VERSION == "apple_silicon" ] ; then
DL_CONDA="${URL_CONDA}arm64.sh"
fi
}
post_install_opts() {
# Post installation options
header "POST INSTALLATION ACTIONS"
info "Launching Faceswap requires activating your Conda Environment and then running\
Faceswap. The installer can simplify this by creating an Application Launcher file and placing it \
on your desktop to launch straight into the Faceswap GUI"
if ask_yesno "Create FaceswapGUI Launcher?" "Yes" ; then
DESKTOP=true
fi
}
review() {
# Review user options and ask continue
header "Review install options"
info "Please review the selected installation options before proceeding:"
echo ""
if $XQUARTZ ; then echo " - The XQuartz installer will be downloaded and launched" ; fi
if ! check_folder_exists "$DIR_CONDA"
then
echo " - MiniConda3 will be installed in '$DIR_CONDA'"
else
echo " - Existing Conda install at '$DIR_CONDA' will be used"
fi
if $CONDA_TO_PATH ; then echo " - MiniConda3 will be added to your PATH" ; fi
if check_env_exists ; then
echo $' \e[33m- Existing Conda Environment '$ENV_NAME $' will be removed\e[39m'
fi
echo " - Conda Environment '$ENV_NAME' will be created."
if check_folder_exists "$DIR_FACESWAP" ; then
echo $' \e[33m- Existing Faceswap folder '$DIR_FACESWAP $' will be removed\e[39m'
fi
echo " - Faceswap will be installed in '$DIR_FACESWAP'"
echo " - Installing for '$VERSION'"
if [ $VERSION == "nvidia" ] ; then
echo $' \e[33m- Note: Please ensure that Nvidia drivers are installed prior to proceeding\e[39m'
fi
if $DESKTOP ; then echo " - An Application Launcher will be created" ; fi
if ! ask_yesno "Do you wish to continue?" "No" ; then exit ; fi
}
xquartz_install() {
# Download and install XQuartz
if $XQUARTZ ; then
info "Downloading XQuartz..."
yellow ; download_file $DL_XQUARTZ
echo ""
info "Installing XQuartz..."
info "Admin password required to install XQuartz:"
fname="$(basename -- $DL_XQUARTZ)"
yellow ; sudo installer -pkg "$TMP_DIR/$fname" -target /
echo ""
fi
}
conda_install() {
# Download and install Mini Conda3
if ! check_folder_exists "$DIR_CONDA" ; then
info "Downloading Miniconda3..."
yellow ; download_file $DL_CONDA
info "Installing Miniconda3..."
yellow ; fname="$(basename -- $DL_CONDA)"
bash "$TMP_DIR/$fname" -b -p "$DIR_CONDA"
if $CONDA_TO_PATH ; then
info "Adding Miniconda3 to PATH..."
yellow ; "$CONDA_EXECUTABLE" init zsh bash
"$CONDA_EXECUTABLE" config --set auto_activate_base false
fi
fi
}
check_env_exists() {
# Check if an environment with the given name exists
if check_file_exists "$CONDA_EXECUTABLE" ; then
"$CONDA_EXECUTABLE" env list | grep -qE "^${ENV_NAME}\W"
else false
fi
}
delete_env() {
# Delete the env if it previously exists
if check_env_exists ; then
info "Removing pre-existing Virtual Environment"
yellow ; "$CONDA_EXECUTABLE" env remove -n "$ENV_NAME"
fi
}
create_env() {
# Create Python 3.10 env for faceswap
delete_env
info "Creating Conda Virtual Environment..."
yellow ; "$CONDA_EXECUTABLE" create -n "$ENV_NAME" -q python="$PYENV_VERSION" -y
}
activate_env() {
# Activate the conda environment
# shellcheck source=/dev/null
source "$DIR_CONDA/etc/profile.d/conda.sh" activate
conda activate "$ENV_NAME"
}
delete_faceswap() {
# Delete existing faceswap folder
if check_folder_exists "$DIR_FACESWAP" ; then
info "Removing Faceswap folder: '$DIR_FACESWAP'"
rm -rf "$DIR_FACESWAP"
fi
}
clone_faceswap() {
# Clone the faceswap repo
delete_faceswap
info "Downloading Faceswap..."
yellow ; git clone --depth 1 --no-single-branch "$DL_FACESWAP" "$DIR_FACESWAP"
}
setup_faceswap() {
# Run faceswap setup script
info "Setting up Faceswap..."
python -u "$DIR_FACESWAP/setup.py" --installer --$VERSION
}
create_gui_launcher () {
# Create a shortcut to launch into the GUI
launcher="$DIR_FACESWAP/faceswap_gui_launcher.command"
launch_script="#!/bin/bash\n"
launch_script+="source \"$DIR_CONDA/etc/profile.d/conda.sh\" activate && \n"
launch_script+="conda activate '$ENV_NAME' && \n"
launch_script+="python \"$DIR_FACESWAP/faceswap.py\" gui"
printf "$launch_script" > "$launcher"
chmod +x "$launcher"
}
create_app_on_desktop () {
# Create a simple .app wrapper to launch GUI
if $DESKTOP ; then
app_name="FaceswapGUI"
app_dir="$TMP_DIR/$app_name.app"
unzip -qq "$DIR_FACESWAP/.install/macos/app.zip" -d "$TMP_DIR"
script="#!/bin/bash\n"
script+="bash \"$DIR_FACESWAP/faceswap_gui_launcher.command\""
printf "$script" > "$app_dir/Contents/Resources/script"
chmod +x "$app_dir/Contents/Resources/script"
rm -rf "$HOME/Desktop/$app_name.app"
mv "$app_dir" "$HOME/Desktop"
fi ;
}
check_for_sudo
check_for_curl
check_for_xcode
banner
user_input
review
create_tmp_dir
xquartz_install
conda_install
create_env
activate_env
clone_faceswap
setup_faceswap
create_gui_launcher
create_app_on_desktop
info "Faceswap installation is complete!"
if $CONDA_TO_PATH ; then
info "You should close the terminal before proceeding" ; fi
if $DESKTOP ; then info "You can launch Faceswap from the icon on your desktop" ; fi
if $XQUARTZ ; then
warn "XQuartz has been installed. You must log out and log in again to be able to use the GUI" ; fi
xcode-select install
Last edited by torzdf on Tue Aug 01, 2023 9:59 am, edited 1 time in total.
Hello,
I am MacOS user (High Sierra 10.13.6 with intel )
Installation was completed but when I click the FaceswapGUI nothing show up in the screen.
I am wondering if I was missing something during installation. During installation I notice : cudatoolkit, opencv-python, and tensorlfow could not install and must install manually. Could this be the reason or I missed something prior to installation? Thank you.
Last edited by Wadi on Thu Aug 03, 2023 10:53 am, edited 1 time in total.
Hello,
I am MacOS user (High Sierra 10.13.6 with intel )
Installation was completed but when I click the FaceswapGUI nothing show up in the screen.
I am wondering if I was missing something during installation. During installation I notice : cudatoolkit, opencv-python, and tensorlfow could not install and must install manually. Could this be the reason or I missed something prior to installation? Thank you.
What GPU do you have?
Either way, unfortunately installing on Intel Mac with Nvidia GPU is non-trivial and can't be entirely handled by the install script. This is because Apple dropped Nvidia support a long time ago, so applications that are required by Faceswap cannot be installed through our standard install system.
Unfortunately, whilst I have a macOS High Sierra machine to test the install script on, it does not have an Nvidia GPU attached, so I cannot fully test the process,
See these notes in the original post:
Nvidia - you will likely run into problems. The last Nvidia drivers available on macOS are only on High Sierra. This means that, whilst the install option for Nvidia is there, Cuda will need to be installed, and Tensorflow 2.10 will need to be compiled to use the installed version of cuda (stock Tensorflow 2.10 will fail to install on High Sierra).
Hi, I'm having trouble launching the app after installation. The launcher flashes an empty window for a split second and that's it. I tried the command line launcher and got this:
Last login: Wed Aug 23 20:01:28 on ttys000
/Users/joshua/faceswap/faceswap_gui_launcher.command ; exit;
joshua@Joshuas-Mac-Studio ~ % /Users/joshua/faceswap/faceswap_gui_launcher.command ; exit;
/Users/joshua/faceswap/faceswap_gui_launcher.command: line 2: /Users/joshua/etc/profile.d/conda.sh: No such file or directory
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.
[Process completed]
So I made a copy of the command line launcher and changed the directory to exactly where that "conda.sh" file is (/Users/joshua/miniconda3/etc/profile.d/conda.sh) and got this instead, and still no app lauch:
Last login: Wed Aug 23 20:01:58 on ttys000
/Users/joshua/faceswap_gui_launcher_edit.command ; exit;
joshua@Joshuas-Mac-Studio ~ % /Users/joshua/faceswap_gui_launcher_edit.command ; exit;
Traceback (most recent call last):
File "/Users/joshua/faceswap/faceswap.py", line 12, in <module>
from lib.cli import args as cli_args # pylint:disable=wrong-import-position
File "/Users/joshua/faceswap/lib/cli/args.py", line 13, in <module>
from lib.utils import get_backend
File "/Users/joshua/faceswap/lib/utils.py", line 20, in <module>
import numpy as np
ModuleNotFoundError: No module named 'numpy'
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.
[Process completed]
Any ideas? Fwiw I installed Xcode and XQuartz. Mac Studio, Ventura 13.5
Last edited by torzdf on Thu Aug 24, 2023 9:12 am, edited 1 time in total.
UPDATE: I tried reinstalling, and attached a text file from Terminal. I no longer see the errors pasted below from the first installation process, but I still get the same error when trying to launch.
Ok. for some reason your environment hasn't installed correctly. Could you provide the file faceswap_setup.log from the faceswap folder please.
Yikes. No such file. But I did save the install process to a pdf. It's not letting me attach it, but here's the part that looks problematic, near the end (and I did log out/log in):
INFO Installing ffmpy>=0.3.0
INFO "ffmpy>=0.3.0" not available in Conda. Installing with pip
INFO Installing ffmpy>=0.3.0
WARNING Couldn't install ffmpy>=0.3.0 with pip. Please install this package manually
INFO Installing tensorflow-macos<2.11.0,>=2.10.0
INFO "tensorflow-macos<2.11.0,>=2.10.0" not available in Conda. Installing with pip
INFO Installing tensorflow-macos<2.11.0,>=2.10.0
WARNING Couldn't install tensorflow-macos<2.11.0,>=2.10.0 with pip. Please install this package manually INFO Installing tensorflow-deps<2.11.0,>=2.10.0
INFO "tensorflow-deps<2.11.0,>=2.10.0" not available in Conda. Installing with pip
INFO Installing tensorflow-deps<2.11.0,>=2.10.0
WARNING Couldn't install tensorflow-deps<2.11.0,>=2.10.0 with pip. Please install this package manually INFO Installing tensorflow-metal>=0.6.0,<0.7.0
INFO "tensorflow-metal>=0.6.0,<0.7.0" not available in Conda. Installing with pip
INFO Installing tensorflow-metal>=0.6.0,<0.7.0
WARNING Couldn't install tensorflow-metal>=0.6.0,<0.7.0 with pip. Please install this package manually INFO Installing decorator
INFO decorator not available in Conda. Installing with pip
INFO Installing decorator
WARNING Couldn't install decorator with pip. Please install this package manually
INFO Installing cloudpickle
INFO cloudpickle not available in Conda. Installing with pip
INFO Installing cloudpickle
WARNING Couldn't install cloudpickle with pip. Please install this package manually
ERROR Some packages failed to install. This may be a temporary error which might be fixed by re-running th is script. Otherwise please install these packages manually.
INFO Faceswap installation is complete!
INFO You should close the terminal before proceeding
INFO You can launch Faceswap from the icon on your desktop
WARNING XQuartz has been installed. You must log out and log in again to be
WARNING able to use the GUI
Ok, this is all a bit mystifying, other macOS users have not reported this issue.
If it is not generating the log file, then there are definitely issues!
From the attached output, it appears to not find a location for where miniconda is installed, it then also fails to run some command.
Most likely you have some kind of issues/conflicts on your system. In the first instance you could try following the macOS equivalent of this: app.php/faqpage#f1r1
Good afternoon, I have a mac with intel processor and amd rx 590 ( metal 2.0). The question is about the performance of the GPU. Ventura 5.1 system
As I understood from the instructions, first I need to install faceswap with CPU configuration via github script for macos, and only then tenserflow-metal and tenserflow-macos dependency for GPU. But the question is, how can I make it so that the GPU is also detected at startup? Because in the end I see only CPU in faceswap, and no hint about GPU.
Unfortunately I do not own a Mac with an Intel card to be able to tell you this. The original instructions are based on what should work based on the research I did.
I'm not sure how many Faceswap users have Intel Macs with AMD cards, so you may be better off asking in a more general purpose Tensorflow forum
Unfortunately I do not own a Mac with an Intel card to be able to tell you this. The original instructions are based on what should work based on the research I did.
I'm not sure how many Faceswap users have Intel Macs with AMD cards, so you may be better off asking in a more general purpose Tensorflow forum
how can I make it so that the GPU is also detected at startup? Because in the end I see only CPU in faceswap, and no hint about GPU.
Tensorflow metal should automatically pick up your GPU, but without an Intel Mac with AMD GPU to test on, I can't confirm this
Do I understand correctly that in the program itself will be displayed only CPU, but as soon as I run for example training, then in fact will work both CPU and GPU?
Ok, this is all a bit mystifying, other macOS users have not reported this issue.
If it is not generating the log file, then there are definitely issues!
From the attached output, it appears to not find a location for where miniconda is installed, it then also fails to run some command.
Most likely you have some kind of issues/conflicts on your system. In the first instance you could try following the macOS equivalent of this: https://forum.faceswap.dev/app.php/faqpage#f1r1
