Maunal tool - alignments vs masked area

The Extraction process failing on you, and you aren't getting an error back with clear instructions? Tell us about it here


Forum rules

Read the FAQs and search the forum before posting a new topic.

This forum is for reporting errors with the Extraction process. If you want to get tips, or better understand the Extract process, then you should look in the Extract Discussion forum.

Please mark any answers that fixed your problems so others can find the solutions.

Locked
User avatar
Fubared
Posts: 11
Joined: Tue Dec 29, 2020 4:19 pm

Maunal tool - alignments vs masked area

Post by Fubared »

Hi,
When editing masks to cut out anything covering the face, i notice the masked area can overspill the face, so something that isnt a face is masked in red. part of a neck below the chin for example.

If the alignment is correctly matching the outline of the face, and chin, in this example, will any masked area outside of this alignment be ignored when training & converting?

Be useful to know if these "extra" masked areas can be ignored and don't need cleaning up, as they are outside of the alignment area.

Thanks

User avatar
torzdf
Posts: 2649
Joined: Fri Jul 12, 2019 12:53 am
Answers: 159
Has thanked: 128 times
Been thanked: 622 times

Re: Maunal tool - alignments vs masked area

Post by torzdf »

Generally, if the mask overspills the face, then you want to remove the overspill.

Not so important for training, but in convert, anything which is "red" will be swapped.

My word is final

Locked