The Extraction process failing on you, and you aren't getting an error back with clear instructions? Tell us about it here
Read the FAQs and search the forum before posting a new topic.
This forum is for reporting errors with the Extraction process. If you want to get tips, or better understand the Extract process, then you should look in the Extract Discussion forum.
Please mark any answers that fixed your problems so others can find the solutions.
- Posts: 9
- Joined: Tue Dec 29, 2020 4:19 pm
When editing masks to cut out anything covering the face, i notice the masked area can overspill the face, so something that isnt a face is masked in red. part of a neck below the chin for example.
If the alignment is correctly matching the outline of the face, and chin, in this example, will any masked area outside of this alignment be ignored when training & converting?
Be useful to know if these "extra" masked areas can be ignored and don't need cleaning up, as they are outside of the alignment area.
- Posts: 1495
- Joined: Fri Jul 12, 2019 12:53 am
- Has thanked: 51 times
- Been thanked: 287 times
Generally, if the mask overspills the face, then you want to remove the overspill.
Not so important for training, but in convert, anything which is "red" will be swapped.